My Store
Luba - Rims
Luba - Rims
Couldn't load pickup availability
🔧 About the Kit
These custom-made decorative tire rims are designed to enhance the appearance of your Mammotion Luba robotic lawnmower.
Compatible with both Luba 1 (L1) and Luba 2 (L2) models, they’re tailored to fit different wheel screw layouts — centered or outer.
✔ Sold as a complete set of 4 rims — one for each wheel
✔ Made to fit factory wheels using original screws
✔ Spacers included with centered versions to prevent screw pull-through during installation torque
This is a cosmetic styling upgrade — not intended to affect wheel performance, traction, or mechanical behavior.
---
🔄 Version Guide
Choose the version that matches your Luba model's wheel layout:
L1 – AWD
✔ All four wheels use the outer screw pattern
✔ Found on early Luba 1 units with full AWD wheels
L1 – Omni
✔ Front wheels: centered screw layout (omni wheels)
✔ Rear wheels: outer screw layout
✔ Common on Luba 1 units with omni front and AWD rear
L2 – Centered Screws
✔ All four wheels use centered screws
✔ Typical on Luba 2 models
L2 – Outer Screws
✔ Rear wheels: outer screw layout
✔ Front wheels: centered layout (standard omni wheels)
✔ Seen on some Luba 2 units
> 🧩 Not sure which you have? Just send us a photo of your wheels and we’ll help verify.
🔩 Most units ship with 20mm screws. If your robot came with shorter 16mm screws, longer ones may be needed (not included).
---
✅ Benefits
Custom-fit aesthetic upgrade for your Luba robot
Works with both AWD and omni wheel configurations
Spacer support included for centered screw models
Uses original screws – no special tools required
---
⚠️ Disclaimer
These are visual upgrades only, designed for Mammotion Luba robots.
They are not intended to improve performance or structural function.
Any modification is done at the buyer’s own risk. PrintedbyAdermalm does not take responsibility for damage caused by improper installation or use.
---
📩 Still unsure which version fits your Luba? Send us a message with a quick photo — we’ll help you pick the right fit!
Share

Great product, looks awesome and protects the sides of the wheels!
Les enjoliveurs sont très jolis, mais par contre l'impression est plus fine et moins bien finie à certains endroits, la partie ou insérer les vis est un peu fine et fragile, j'ai du mettre des vis avec des rondelles à tête plate afin que ça tienne bien, j'en ai acheté des plus longues car avec celles d'origine ça tenait sur très peu de longueur.
Bra hanterat, väl omhändertagen process av säljaren. Proffsigt 👌🏻
Sehen sehr gut aus, alles Perfekt
Bin sehr zufrieden, die Kappen schützen und sehen gut aus.
Kann den Kauf bei Adermalm nur empfehlen.
Meine Empfehlung:
24 neue V2A Schrauben (12 + 12, hinten länger als vorn, ca. 7 - 8 mm länger ... ca. 7 EUR im Fachhandel) kaufen und mit etwas Schraubensicherungsmittel montieren. Die originalen Radschrauben haben aus meiner Sicht nach dem Aufsetzen der ca. 6 mm Distanzhülsen und der Radkappen nicht mehr genug Gewindegang, um das Rad gut zu fixieren. Jeweils zwei gegenüberliegende Bohrungen der Kappen waren nicht exakt. Mit etwas Kraft und Geschick, bringt man die neuen Schrauben dann aber doch hindurch und fest. Klare Kaufempfehlung!
Habe gerade noch 2 Disc-Hüllen für die beiden Messerteller bestellt um einen Schwachpunkt des Festwerdens der Messer beim Rotieren zu beseitigen. Müsste dann wesentlich besser funktionieren.